Automatic Density Meter Gauge Hydrometer Electronic Density Meter ZMD-1 for Solid and Liquid Rubber Plastic Oil Accuracy 1mg / cm3

Introduction The device can be extensively used in m any nonmetal industries including electronics , rubber, plastics,electric wires and cables,automobile parts, ferrites, powder metallurgy, food, beverage , perfumery compounds, f1avors and cosmetics, etc The instrument fully conforms to following standards GB/T11 540 -2008 Fragrance/Flavor substances - Determination of relative density GB/T61 1- 2006 Chemical reagent - General method for the determination of density GB/TI463-2005 Test methods for density and relative density offiber reinforced plastics JJG 171 -2004 Relative Density Balance for Liquid GB/T5009.2 - 2003 Determination of relative density of foods GB 1 033-1 986 Test method for density and relative density of plastics Technical Specifications Model: ZMD-1 Measuring range: Density/specific gravity: o ~ 300.00g/cm³; Resolution:0.001g/cm³ Weighing: o ~ 300.00g; Resolution:0. 001g Calibrating poise: 200g Measuring disc diameter: φ90mm Measuring method: Solid specific weight is automatically calculated. liquid density is directly read External dimensions: 320mmx190mmx330mm (LxWxH) Power supply:220V / 0.5A 50Hz or 110V(Send according to your country’s Voltage) The measurement can be completed in only several a few steps, the data is accurate, and the operation is simple and rapid Step 1: Enter the solid density measuring mode Step2: Put the sample on the upper weighing disc Step3: Put the sample on the lower weighing disc Slep4: The sample density will be displayed directly

• Calibrating poise--- 200g
• External dimensions---320mmx190mmx330mm (LxWxH)
• Measuring range--- Density/specific gravity: 0 ~ 300.00g/cm³; Resolution:0.001g/cm³
• Measuring method---Solid specific weight is automatically calculated. liquid density is directly read
• Power supply---220V / 0.5A 50Hz or 110V(Send according to your country’s Voltage)